Logo Goodlift

Delivery, installation and hand over of passenger lifts and goods lifts

Expertise and reliability are the keywords of our working method.

Passenger lifts

At first sight they look like normal lifts, doors, electronic devices, solid constructions a.s.o. But if you look further you realize there is something more.
Lifts for use in seagoing vessels and marine structures have to operate in more difficult circumstances than they do in the comfort of a high rise building on shore.

The demands made upon marine lifts are very special as anyone acquainted with the sea will know. Vessel movement, vibration fire proofing, escape routes and cable assembly all demand an adapted design.
Of these perhaps fire is the most important constraint.

We as Goodlift NL Consultancy are familiar with the strict and particular rules and regulations of the International Organizations involved with safety on board of seagoing vessels, Classification bureau’s and governments.

Where standard solutions are not available or not allowed, our tailor made lifts are the answer. For all passenger and crew lifts, electrically or hydraulically operated, the lift machine-room on top of the trunk, adjacent or below, our designers will find a solution. We are specialized in application of fire retarding-doors according to SOLAS, automatic operated central opening or manually operated single panel swing doors.

The specs of our Passenger lifts:

Traction lifts, suspension 1:1 or 2:1

With or without lift machine room (MRL)

Machine room less with gearless drive unit

Lift speed from 1,0 – 2,5 m/s

Hydraulic lifts

With or without lift machine room (MRL)

Cylinder located central under the lift car

Cylinder located beside the lift car

Lift speed from 0,5 –1,6 m/s

Explosion safe lifts

Thanks to our thorough knowledge of the specific rules and regulations brought about by the hazardous environment in the petrochemical industry, Goodlift NL Consultancy is one of the very few companies able to design, manufacture and install lifts suitable for use in hazardous areas. Hazardous areas may be the result of gasses, vapours, liquids or dust. We can offer the solution for each of these hazard types.

Our product range is huge, including electric traction passenger and passenger/goods lifts, suitable for loads between 300 and 5000 kg, whilst in a hydraulic version, loads of up to 10,000 kg can be carried. We also supply specially-designed goods lifts and heavy equipment lifting platforms for loads of up to 20 tonnes. Whenever a standard product is either unsuitable or prohibited, we will help you find the perfect solution.

Our clients include Petrochemical operators, contractors and engineering agencies,
throughout the World. Our lifts for passenger and/or goods, with pre-fabricated hoist way construction wherever applicable, our heavy lifting equipment and our dumb waiters can be deployed in every conceivable situation, even on board seagoing vessels or platforms.

The specs of our Explosion safe lifts:

Design, construction and installation of lifts for use in a explosion hazardous environment

Solutions for gasses, liquors and vapours

Traction lifts: load 300 – 5000kg

Hydraulic lifts: load up to 10.000kg

Hoisting platforms: load up to 20.000kg

Use of steel hoist way construction

Dumbwaiters

Dumbwaiters become used for transportation of goods with a maximum load up to 300 Kgs or under special conditions 500 Kgs, between the several decks.

There are two different types:

  1. Dumbwaiters with bi-parting doors at serving height...
  2. ...and dumbwaiters with hinged doors at floor level.

The specs of our Dumbwaiters:

Load 50 – 300kg

Speed 0,15 – 0,2 – 0,25 of 0,3 m/s

Doors

Doors located at the same side of the trunk, opposite or diagonal

Partial vertical sliding hatches at height of parapet or single panel hinged doors at floor height

Fire retardant class A60 according SOLAS

Dumpwaiters with bi-parting doors at serving height

Doors : at the same side, on opposite sides and diagonal.
Machine location : above or under in the trunk.
above or adjacent or behind the trunk.
Load : 50, 100 of 300 Kgs.
Speed : 0,2 - 0,25 - 0,3 or 0,45 m/sec, depends on machine location
Standard car dimensions : width 300 mm up to 1000 mm.
depth 320 mm up to 1000 mm.
height 600 mm up to 1200 mm.
Car dimensions : in steps of 50 mm.
Doors : bi-parting vertical opening doors
Fire class : A30 according to SOLAS.

Other dimensions in consultation with Goodlift NL.

Dumpwaiters with hinged doors at floor level

Doors : at the same side, on opposite sides and diagonal.
Machine location : above or under in the trunk.
above or adjacent or behind the trunk.
Load : 100, 200 or 300 Kgs.
Speed : 0,15 - 0,2 - 0,25 or 0,3 m/sec, depends on machine location
Standard car dimensions : width 400 mm up to 1400 mm.
depth 600 mm up to 1000 mm.
height 800 mm up to 1200 mm.
Car dimensions : in steps of 50 mm.
Doors : single panel hinged doors
Fire class : A60 according to SOLAS.

Other dimensions in consultation with Goodlift NL.